Dedicated To Giving Customers
The Knowledge To Make An Informed Decision
0800 061 4861 Lines Open 7 Days FREE Independent Advice
Warmer Roof is designed to be used for new sun room installations or as a roof replacement to existing conservatories, and features a U-value of 0.14. This “warm roof” design was conceived through the use of a pod system finished off externally with lightweight tiles, of your choosing.
All structural and building regulations are met thanks to careful design and engineering. The roof has been extensively tested and certificates issued to ensure it complies and exceeds the current Building Regulation requirements for both structural and thermal performance.
The Speedframe is a true flat pack traditional timber roof system with Building Control Approval manufactured in TR26 Structural Timber.
The Speedframe has been designed to be installed onto the exisiting ringbeam and onto the exisiting box gutter.
All roof kits are supplied. pre-drilled, pre-bracketed and with the jack rafters attached to the hip with a unique swing bracket. This allows quick and easy positioning onto the existing ringbeam and box gutter. Our full roof kits come with tiles, battens, 125mm insulation, fascias, fixings, trims and guttering as standard. The roof frame only option allows you to purchase your own lightweight tiles etc saving even more money.
Celsius solid roof features a structural array of eaves timbers, wall-plate timbers, eaves fillet timbers, ridge
timbers, rafter and butt joints, in addition to hip timbers for Victorian and Georgian designs, which are square
cut or mitre cut as required to construct a purpose-built framework for the interlocking SIPs, tailored for specific project requirements.
Synseal’s Celsius solid roof system is comprised of 9 standard timber sections
Sections are machined from C24 construction grade structural timber (German white wood)
Standard timber sections are used to form both Ridge and Hip components
These are bonded with timber adhesive and mechanically fixed in the factory, then cut to length to suit each
Kingspan TEK Building System panels consist of a high performance rigid urethane insulation core, manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP), sandwiched between two layers of Oriented Strand Board type 3 (OSB/3). During manufacture, the insulation core is bonded by autohesion to the OSB/3 facings. This process provides more reliable and superior adhesion than the secondary bonding process used in the manufacture of most others SIPs.
Kingspan Insulation Ltd has secured BBA and NSAI Agrement certification for the Kingspan TEK Building System