Compare Conservatory Tiled Effect Roofs Here and be amazed

Compare tiled conservatory roof dog 2

Compare Tiled Conservatory Roofs

Dedicated To Giving Customers

The Knowledge To Make An Informed Decision


0800 061 4861 Lines Open 7 Days FREE Independent Advice

69933 LogoorBanner_000

SuperFOIL manufacture some of the highest performance insulation products on the market, including SF60 the worlds highest performance multi foil insulation.

Made from a combination of foil’s (radiant barriers) and loft wadding layers; SuperFOIL provides exceptional performance at affordable costs.


Multi foil insulation offers additional benefits over more traditional types of insulation. Because SuperFOIL consists of multiple layers of radiant barrier foil, it is able to protect against heat loss through radiation that non-foil insulation’s offer no protection against. Additionally by installing as a continuous layer and sealing fully SuperFOIL provides an air and vapour barrier. Controlling air leakage such as draughts is paramount to the achieve high levels of energy efficiency. SuperFOIL is certified under CE for its use as a vapour & water barrier.

Multi Foil Insulation is easy to install and offer considerable time savings vs installing traditional insulation. Produced from 40% recycled materials and offering a life expectancy in excess of 50 years SuperFOIL achieves a GWP rating of 3.



Key Features

  • 2 in 1 – Vapour control layer and foil insulation layer in one.

  • BBA tested & LABC Registered Detail Approved.

  • Radiant barrier,reducing solar gain in summer & heat loss in winter.

  • Suitable for use in roofs, walls & floors on both new build or renovation projects.

  • Used on its own or in combination with other insulation’s, SuperFOIL can achieve any U-value.

  • Easy to install with little wastage & produced from 40% recycled materials.




SuperFOIL-Insualtion 69933

EcoQuilt Expert is also The Highest Performance Multifoil Insulation blanket in Europe when measured in Performance against Cost. If your project is going through Building Control we recommend using our alternative solution SuperQuilt.


We guarantee you will not buy a higher quality Multifoil with an R value of more than 2.0 for less. Energy payback time is very fast


EcoQuilt Expert works as a total Insulation blanket preventing warm air from leaving a property and reflecting the heat back in to the home. EcoQuilt Expert is also recommended for Conservatory Roofs to keep more heat in Winter and importantly, reflect unwanted heat out in Summer. EcoQuilt is also designed for Garden Buildings, Cellars and Garage Conversions as well as hundreds of other projects where a total thermal insulation break is required.


  • Clean, Dust Free, Non Irritant, Hypoallergenic.

  • Ultra thin and space saving - only 25mm thick.

  • Reflective Foil works all year round.

  • Weatherproof and Draught Proof.

  • Durable - doesn't degrade over time.

  • Easy to install - DIY or Professional.

  • Minimise the risk of condensation.

  • Unique sealed edges for overlapping and easy fixing.

  • 1.2m widths to suit Irish stud and rafter widths.

  • Compact and lightweight rolls.

  • Reinforced layers prevent sagging away from fixings.

  • No special clothing, masks or equipment required to fit.

  • Over 70% reduction in U-Value over an uninsulated roof.






Airtec is a thin, flexible, easy to install aluminium bubble insulation membrane which acts by trapping air within its bubble structure while creating low emissivity air spaces from its foil faced outer layers, enhancing its overall thermal capabilities.


Airtec has been independently tested by BBA.


With product specification, project support, U-value or condensation risk calculations, we at YBS Insulation believe we offer the highest level of support to all of our customers.


Clean and easy to use insulation for refurbishments or new builds. Suitable for dry lining, cavity and stud walls, pitched roofs as well as under floorboards and in attics and garages. Meets current building regulations when installed in accordance with the manufacturer's instructions.


  • Thermal Resistance up to 1.497W/m²K

  • Suitable for Walls, Roofs & Under Suspended Floors

  • Equivalent to 55mm Polystyrene

  • Lightweight

  • Time-Saving

  • Typically Used for New Builds, Refurbishment & to Insulate Behind Dry Lining




airtec4 logo

SuperQuilt not only provides a total Insulation Blanket on your Home,


SuperQuilt LG is NHBC & LABC Certificated to Insulate Conservatory Roofs, Lofts, Roofs, Wallsand Floors.


To achieve a U value of .18 (or better) in a Roof "Without fitting ANY Kingspan, Celotex or Rockwool



  • Fully independently tested by the LABC & BDA.

  • Used to Insulate Conservatory Roofs by Major Conversion Specialists

  • Meets Building Regs. Certificated for Roofs, Walls and floor Insulation -the space saving solution

  • Superquilt can help meet 0.15, 0.18, and 0.20 U-Value for Building Regs to see how see information Data Sheet.

  • Builders favorite choice for loft & Barn conversions

  • Fast, Simple and Easy-to-fit for D.I.Y and Trade


Kingspan Thermapitch TP10 is a high performance insulation with a fibre-free rigid thermoset polyisocyanurate (PIR) core.


It is suitable for tiled or slated pitched warm roof spaces, and has a thermal conductivity of 0.022 W/m·K.




KINGSPAN - Thermapitch TP10

kingspan insulation board kingspan logo Kingspan - thermopitch TP10 product info

Kingspan Thermaroof TR24 is a high performance insulation with a fibre-free rigid thermoset polyisocyanurate (PIR) core.


It is suitable for flat roofs waterproofed with partially bonded torch applied multi-layer bituminous waterproofing, and has a thermal conductivity of 0.024 - 0.026 W/m·K.




KINGSPAN - Thermaroof TR24

THERMAROOF TR24 kingspan logo
Thermaroof TR24

Kingspan Thermaroof TR26 LPC/FM is a high performance insulation with a fibre-free rigid thermoset polyisocyanurate (PIR) core.


It is suitable for flat roofs waterproofed with mechanically fixed single-ply waterproofing, and has a thermal conductivity of 0.022 W/m·K.




KINGSPAN - Thermaroof TR26 LPC/FM

Thermaroof TR26 LPC FM photo kingspan logo Thermaroof TR26 LPC FM PRODUCT INFO

KINGSPAN - Thermaroof TR27 LPC/FM

Thermaroof TR27 LPC FM photo kingspan logo Thermaroof TR27 LPC FM product info

Next generation roof insulation...

With a declared thermal conductivity of 0.007 W/m∙K, the Kingspan OPTIM-R Roofing System provides an insulating performance that is up to five times better than commonly used insulation materials.


The System is made up of vacuum insulation panels accompanied with rigid thermoset polyisocyanurate (PIR) insulation infill panels which can be cut to fit around problem areas such as roof lights or ventilator kerbs.


It is designed for use where there is a requirement for low U-values and the thinnest possible roof build-up. It is particularly suited for applications where there may be little space for installing new roof insulation, for example in buildings with planning height restrictions.



KINGSPAN - OPTIM-R Roofing System

23516(1) kingspan logo

Kingspan Thermaroof TR27 LPC/FM is a high performance insulation with a fibre-free rigid thermoset polyisocyanurate (PIR) core.


With a thermal conductivities as low as 0.024 W/m·K, it is used to insulate flat roofs waterproofed with fully adhered single-ply, partially bonded built-up felt, mastic asphalt and cold liquid applied waterproofing.




OPTIM-R Roofing System product info

Premium performance pitched roof insulation.


Kingspan Kooltherm K107 Pitched Roof Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core and a low emissivity foil outer face.


As part of our Kooltherm K100 range, it provides a level of performance that is unrivalled in the world of rigid thermoset insulation materials with a thermal conductivity of just 0.018 W/m·K across all thicknesses.


Manufactured with a blowing agent that has zero ODP and low GWP, it is used to insulate tiled or slated pitched roof and attic spaces.



KINGSPAN - Kooltherm K107 Pitched Roof Board

Kooltherm K107 Pitched Roof Board photo kingspan logo Kooltherm K107 Pitched Roof Board photo

Kingspan Kooltherm K118 Insulated Plasterboard is a premium performance insulation with a fibre-free rigid thermoset phenolic core.


As part of our Kooltherm K100 range, it provides a level of performance that is unrivalled in the world of rigid thermoset insulation materials with a thermal conductivity of just 0.018 W/m·K across all thicknesses.


Manufactured with a blowing agent that has zero ODP and low GWP, it is an insulated plasterboard for mechanically fixed and adhesively bonded insulated dry-lining.



KINGSPAN - Kooltherm K118 Insulated Plasterboard

22608 kingspan logo Kooltherm K118 Insulated Plasterboard product info

TRISO-SUPER 10+ has been tested in comparison with mineral wool for a total of 3 months at sites in the UK and France. Energy consumption data was collected from two identical, full scale roof structures at each site, one fitted with TRISO-SUPER 10+, the other insulated with traditional mineral

wool. The roof structures were tested concurrently and under a range of identical winter weather conditions. The energy consumption was then calculated for a range of UK winter weather conditions to ensure that the results achieved are valid throughout the UK.


TRISO SUPER 10+ has been tested for use in roof construction and has an in-situ thermal insulation performance equivalent to 210mm of mineral wool



TRISO-SUPER 10+ is airtight, watertight and has a high vapour resistance. It acts as a barrier against cold air infiltration and prevents warm air escaping. A tested water vapour resistance of over: Z > 500MNs/g.


Since 1997 this vision has been shared by TRADA Technology Ltd, the laboratory which has developed a reliable “in situ” test protocol. In recognition of the time and energy spent, in July 2011 the BM TRADA. Certification received UKAS accreditation for its Building Products scheme, including assessment of its BIP-001 test protocol used to evaluate the performance of reflective multifoil insulation products in real life conditions

Actis TRISO SUPER 10 Plus Multifoil Insulation


100mm Celotex GA3070 formerly GA4100 Insulation Board 2400x1200mm is a High Performance Rigid PIR Insulation Board. Celotex GA4100 100mm is suitable for a variety of applications, including roof, wall and floor insulation. This multi-purpose PIR Insulation board is one of our biggest selling products due to is diversity in application and it also achieves an A+ rating when compared to the BRE Green Guide.


The General application range of Celotex products are split in to three size categories

TB3000  12mm - 40mm

GA3000GA4000  50mm - 100mm

XR4000  120mm - 200mm


These are all essentially the same product but with varying thicknesses of Insulation Board.

Celotex Insulation boards are made from a expanded Polyisocyanurate (PIR) insulation foam with a foil facing to both sides.


Lambda Value = 0.022

Thickness Range = 50mm - 100mm

CELOTEX - GA3070 Insulation Boards

IKO Enotherm Insulation Boards

IKO enertherm ALU is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality reflecting ALU cladding consists of no fewer than seven layers, combined into a single complex. It is tested under extreme conditions in respect of water absorption, mechanical properties, corrosion resistance and emissivity.

IKO Enertherm



   Insulation shield on the trusses without breaks.

   The IKO enertherm ALU NF PRO board comes with integrated vapour-permeable undertile felt.

   Integrated vapour-permeable undertile felt provided with a double adhesive strip.

   Interior finish and volume are retained.

   Windproof in one operation.

   Very low loading of the roof structure thanks to the light weight.

   Very easy installation without breaks.

Recticel Eurothane GP is a high performance rigid PIR foam board for use in Pitched Roofing, Flooring and Framed Wall applications. The board is suitable for use either between the studs or as an insulated sheathing.


Pitched Roofing Applications;


Eurothane GP is a high performance rigid PIR foam board for use in pitched roofing applications. Eurothane GP, in a wide range of thicknesses, will assist in meeting the appropriate Building Regulations standard with any form of pitched roof construction.



   Low thermal conductivity: 0.022 W/mK

   Facing: Low emissivity multi-layer coated aluminium foil

   Compressive strength: exceeds 140kPa at yield

   Manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP)

   BBA Certified (BBA certificate 02/3905), CE marked, ISO 9001 and ISO 14001

   Fire performance: Surface spread of flame: Class 1 (BS 476, Part 7), Euroclass F (BS EN 13501-1)

Recticel Eurothane GP Insulation Boards


Hybris is a reflective insulation product for timber frame or masonry walls, pitched roofs or ceiling applications. Based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities.

Actis Hybris Reflective Multifoil Insulation Panel


Exclusive to Warmer Roof. Click here to view their page